Comments on: Monitoring an Adaptec 2400a RAID ARRAY with CentOS5 (RHEL) http://chrisschuld.com/2008/09/monitoring-an-adaptec-2400a-raid-array-with-centos5-rhel/ personal musings on the composition of software Mon, 06 Sep 2010 02:10:03 +0000 hourly 1 http://wordpress.org/?v=3.0.1 By: Boris Kunstleben http://chrisschuld.com/2008/09/monitoring-an-adaptec-2400a-raid-array-with-centos5-rhel/#comment-277 Boris Kunstleben Mon, 03 Nov 2008 16:53:40 +0000 http://chrisschuld.com/?p=56#comment-277 Understood,they are gone...:) Thanks for ur help, i'll stick to the Storage Manager... Greetings Boris Understood,they are gone…:)
Thanks for ur help, i’ll stick to the Storage Manager…

Greetings Boris

]]> By: Chris Schuld http://chrisschuld.com/2008/09/monitoring-an-adaptec-2400a-raid-array-with-centos5-rhel/#comment-276 Chris Schuld Mon, 03 Nov 2008 16:38:35 +0000 http://chrisschuld.com/?p=56#comment-276 Boris, you will not be able to run the raidutils because they were designed for the i2o module. Inside of your StorMan path you'll find the tools necessary to query the status of the controller. Good Luck! You may want to remove them as well: rpm -e raidutils Boris, you will not be able to run the raidutils because they were designed for the i2o module. Inside of your StorMan path you’ll find the tools necessary to query the status of the controller. Good Luck!

You may want to remove them as well: rpm -e raidutils

]]> By: Boris Kunstleben http://chrisschuld.com/2008/09/monitoring-an-adaptec-2400a-raid-array-with-centos5-rhel/#comment-275 Boris Kunstleben Mon, 03 Nov 2008 16:16:20 +0000 http://chrisschuld.com/?p=56#comment-275 Hi Chris, that was fast, thanks. But it did not work. The /usr/StorMan/arcconf getconfig 1 works, but raidutils still is unable to SCAN THX Boris Hi Chris,

that was fast, thanks. But it did not work.
The /usr/StorMan/arcconf getconfig 1 works, but raidutils still is unable to SCAN

THX Boris

]]> By: Chris Schuld http://chrisschuld.com/2008/09/monitoring-an-adaptec-2400a-raid-array-with-centos5-rhel/#comment-274 Chris Schuld Mon, 03 Nov 2008 15:40:47 +0000 http://chrisschuld.com/?p=56#comment-274 Hey Boris, The 52445 is a newer SATA device; the older 2400A is a PATA device (and uses the I2O engine). If you jump to this URL you can install the RAID Storage Manager from Adaptec (just follow any directions for RHEL5): http://www.adaptec.com/en-US/speed/raid/storage_manager/asm_linux_x86_v6_00_17922_rpm.htm Let me know if you solve it! Hey Boris,

The 52445 is a newer SATA device; the older 2400A is a PATA device (and uses the I2O engine).

If you jump to this URL you can install the RAID Storage Manager from Adaptec (just follow any directions for RHEL5): http://www.adaptec.com/en-US/speed/raid/storage_manager/asm_linux_x86_v6_00_17922_rpm.htm

Let me know if you solve it!

]]> By: Boris Kunstleben http://chrisschuld.com/2008/09/monitoring-an-adaptec-2400a-raid-array-with-centos5-rhel/#comment-273 Boris Kunstleben Mon, 03 Nov 2008 15:18:03 +0000 http://chrisschuld.com/?p=56#comment-273 Hi, thanks for this advice. so far it worked but now i am getting an "Engine connect failed: SCAN failed" OS: CentOS5.2 Kernel: 2.6.18-92.el Raid Controller: Adaptec ASR52445 Any Idea? Greets Boris Hi, thanks for this advice. so far it worked but now i am getting an “Engine connect failed: SCAN failed”
OS: CentOS5.2
Kernel: 2.6.18-92.el
Raid Controller: Adaptec ASR52445
Any Idea?

Greets Boris

]]>